1053 - 08/15 - Air Emissions, Reminder - Worldwide


The Association has recently seen a number of claims or potential claims for fines imposed on Members as a result of a breach or alleged breach of Marpol Annex VI Regulations.

In this regards we would like to remind our Members that from 1 January 2015, ships trading in designated emission control areas (ECAs) must not use fuel oil on board with a sulphur content exceeding 0.10%. ECAs currently cover the North Sea, Baltic Sea, North American coastline and US Caribbean. Outside the ECAs, with a few exceptions, the worldwide sulphur cap on fuel oil is set at 3.5%, save for passenger ships for which the cap is 1.5%. Following are the exceptions to the general rule.

EU countries
Vessels at berth or anchored in an EU port must use fuel oil with sulphur content not exceeding 0.10%. In EU territorial waters and exclusive economic area outside of ECA area, but not at berth or anchored, fuel used must not exceed 3.5% sulphur content, except for passenger vessels in regular lines which come or go to an EU port which have a limit of 1.5%.

Australia
Low sulphur fuel (0.10% or less) will be mandatory for all cruise ships berthing in Sydney Harbour after 1 October 2015 and in all New South Wales (NSW) ports after 1 July 2016.

Hong Kong
In Hong Kong, all ocean-going vessels (above 500 GT) are required to switch to low-sulphur fuel during the periods the ship is at a berth, excluding the first and last hour of the berthing period. With the term ‘berthed’ it is implied moored at buoys, anchorages, wharfs or terminals or docks within Hong Kong waters. The sulphur content of the fuel must not exceed 0.5%.

Turkey
New regulations on sulphur content limits of marine fuels are in place:

• Sulphur content in marine fuels shall not exceed 0.10% by mass in all vessels arriving at Turkish ports and all inland waterway vessels sailing on Turkish inland waters.
• Sulphur content in marine fuels shall not exceed 1.5% in all passenger vessels providing regular services in areas covered by Turkey’s marine jurisdiction.

These limitations apply to berthed or anchored ships within the boundaries of any port and staying at berth or at anchor for more than two hours. However, they won’t apply to vessels passing the Turkish Straits without calling to any Turkish Port, if their transiting process does not exceed two hours.

The latest sulphur inspection guidance published by the European Maritime Safety Agency (EMSA) can be found here.

Source of Information

Loss Prevention


Industry developments

Polar Shipping

Legal, navigational and environmental resources, news and updates on the development of polar shipping. Read more


US VRP Compliance

With effect from 30th January 2014 non-tank as well as tankships calling at US ports will be required to submit VRPs.  For Club and other resources to assist in compliance click here


International Environmental compliance

Environmental Compliance resource page collates material in respect of International environmental compliance issues affecting our Members. Information from the Club, Loss Prevention and external resources has been collated in one place for ease of reference.


MLC 2006

The Maritime Labour Convention enters into force in August 2013 - resources, news & advice on implementation can be found in this dedicated section.  READ MORE


International sanctions

Recent guidance & corresponding material in respect of international sanctions against various countries has been updated with respect to temporary easing of sanctions against Iran.  READ MORE


Piracy

Essential precautions and preparation against piracy, as well as additional information and resources, loss prevention advisories and useful external web links


Emergency Contacts


If you need to call our offices out of hours and at weekends, click After Office hours for a up to date list of the names of the Duty Executives and their mobile phone numbers. 

Ship Finder


This Ship Finder is updated on a daily basis. Members who need to advise the Club of updates to their recorded ships' details should advise their usual underwriting contact.