604 - 10/08 - Carriage of DRI - Worldwide

10In recognising the hazards associated with the carriage of direct reduced iron (DRI), and current industry bad practice, the International Maritime Organization (IMO) is amending the entry for DRI in the BC Code.

Cliff Mullins, chairman of Minton, Treharne & Davies Group and chair of the UK P&I Club’s Carefully to Carry sub-committee on hazardous cargoes, explains below the update:

“The International Maritime Organization sub-committee on Dangerous Goods, Solid Bulk Cargoes and Containers has been discussing the Code entry for the forms of DRI since DSC 10 in September 2005. Previous entries, as illustrated in the 2001 and 2004 editions of the Code, related to the following:

Direct Reduced Iron such as lumps, pellets and cold moulded briquettes

Instructions for carriage stated either:

  1. Maintenance throughout the voyage of cargo spaces under an inert atmosphere containing less than 5% oxygen. The hydrogen content of the atmosphere should be maintained less than 1% by volume; or
  2. The DRI is manufactured or treated with an oxidation and corrosion inhibiting process, approved to the satisfaction of the competent authority, to provide effective protection against dangerous reaction with sea water or air under shipping conditions.

Direct Reduced Iron briquettes, hot-moulded

The Code advises that the briquettes may slowly evolve hydrogen in contact with water, and states adequate surface ventilation should be provided.

In the period between the two Codes there were several incidents involving the carriage of DRI Fines, unfortunately with the loss of life in some incidents. Problems relating to the safe carriage of DRI were first discussed in DSC 10 but unfortunately no agreement could be reached. Further, agreement could not be reached in DSC 11 and DSC 12.

Briefly, the problems relate to the emission of hydrogen from the finely divided DRI particles following reaction with air and water (particularly seawater). One State with manufacturing facilities for DRI Fines insisted upon a ventilation procedure for the removal of hydrogen generated in the holds of the carrying vessel.

This State provided a stream of documentation relating to various test methods relating to the safe transportation of DRI Fines. Throughout the documentation there is reference to the fact that DRI Fines react with salt water to produce hydrogen - a flammable gas - creating an explosive atmosphere. Two technical publications included in the documentation also state that DRI Fines and sea water will react to produce hydrogen.

Despite all these warnings, the State’s method of carriage related to continuous ventilation of the hold spaces. Unfortunately, the extraction of hydrogen in the hold by ventilation is a process which permits moist sea air to enter the hold space. The moist sea air condenses on the steel surfaces (such as deck heads and bulkheads, etc) before falling on the DRI beneath to produce the flammable explosive hydrogen in air mixes.

DRI in the new BC Code

Following several days of discussion by a working group at IMO in September 2008, DRI will now have 3 categories in the new version of the BC Code:

  1. DRI (A)  Hot Moulded Briquettes/Hot Briquetted iron (HBI)
  2. DRI (B)  DRI pellets or lumps and cold moulded briquettes
  3. DRI (C)  New category for by-product fines. These can be produced from both the pelletising and briquetting process routes.

The new category DRI(C) has been introduced to give recommendations for the carriage of the by-product materials because of the increasing number of shipments of this material. As it is a by-product, it is very difficult to assess what will be the true risks for shipment. As such, DRI(C) material needs to be carried under a number of stringent conditions. The material must:

·  have a moisture content less than 0.3%

·  be carried under an inert atmosphere (usually in a hold filled with nitrogen)

·  have been aged for at least 30 days in order to reduce the reactivity of the material.

It should however be noted that at this time the BC Code is not mandatory. Furthermore, when the BC Code does become mandatory, the new edition includes an option (under Section 1.5 “Exemptions and Equivalent measures”) for a shipper to move solid bulk cargoes without the need for the safety measures described, provided measures taken are at least as effective and safe as that required by the Code. These bulk cargoes could include DRI.”


Source of information: 

Cliff Mullins, BSc, F.Inst.E., F.I.Fire.E

Minton, Treharne & Davies Group

Tel: +44 (0) 29 2054 0000

Email: mtd@minton.co.uk

Industry developments

Polar Shipping

Legal, navigational and environmental resources, news and updates on the development of polar shipping. Read more

US VRP Compliance

With effect from 30th January 2014 non-tank as well as tankships calling at US ports will be required to submit VRPs.  For Club and other resources to assist in compliance click here

International Environmental compliance

Environmental Compliance resource page collates material in respect of International environmental compliance issues affecting our Members. Information from the Club, Loss Prevention and external resources has been collated in one place for ease of reference.

MLC 2006

The Maritime Labour Convention enters into force in August 2013 - resources, news & advice on implementation can be found in this dedicated section.  READ MORE

International sanctions

Recent guidance & corresponding material in respect of international sanctions against various countries has been updated with respect to temporary easing of sanctions against Iran.  READ MORE


Essential precautions and preparation against piracy, as well as additional information and resources, loss prevention advisories and useful external web links

Emergency Contacts

If you need to call our offices out of hours and at weekends, click After Office hours for a up to date list of the names of the Duty Executives and their mobile phone numbers. 

Ship Finder

This Ship Finder is updated on a daily basis. Members who need to advise the Club of updates to their recorded ships' details should advise their usual underwriting contact.