923 - 11/13 - Container Stow Working Space - Australia


A container ship which did not meet the minimum access requirements for container stow working space was recently unable to discharge containers at an Australian port and was forced to leave Australia with containers onboard.


Carriers carrying containers (or cargo generally for that matter) to or from Australian ports should be aware of the requirements of Marine Order, Part 32 - Cargo Handling Equipment. A copy of the Marine Order can be found here
 
The Marine Order imposes strict requirements for the loading and unloading of vessels and, in particular, prescribes minimum access requirements for cargo working areas. For example, where containers are manually secured on a ship, a minimum distance of 550mm between adjacent ends of containers must be provided at all times. Where the container stow extends to the side of the ship, a platform of at least 550mm by 550mm clear of all lashing points and attachments must be provided extending to the side of the ship at a height convenient for a person to secure or release the lashings.
 
Until recently, vessels which did not meet the minimum requirements prescribed in the Marine Order were generally allowed to undertake cargo operations where the vessel could be safely worked under alternative arrangements agreed by the carrier, stevedores and AMSA, however, recent instances suggest an increasing reluctance on the part of stevedores and AMSA to allow cargo operations to be undertaken where the requirements are not met (particularly for vessels on subsequent voyages).
 
It is therefore recommended that vessels carrying containers provide a working space of at least 550mm clear of all obstructions between and alongside containers. Where it is not possible for a vessel to provide a walkway meeting the minimum working space, carriers should avoid using container bays which do not allow for the minimum space.
 
Carriers should also be aware that the Navigation Act prohibits vessel crew handling cargo at an Australian port so the crew will be prohibited from unlashing or lashing containers should stevedores refuse to do so because of the vessel's failure to meet the minimum working space requirements.
 

Source of information:

UK P&I Correspondent - Thynne & Macartney

http://www.thymac.com.au

transport@thymac.com.au

Industry developments

Polar Shipping

Legal, navigational and environmental resources, news and updates on the development of polar shipping. Read more


US VRP Compliance

With effect from 30th January 2014 non-tank as well as tankships calling at US ports will be required to submit VRPs.  For Club and other resources to assist in compliance click here


International Environmental compliance

Environmental Compliance resource page collates material in respect of International environmental compliance issues affecting our Members. Information from the Club, Loss Prevention and external resources has been collated in one place for ease of reference.


MLC 2006

The Maritime Labour Convention enters into force in August 2013 - resources, news & advice on implementation can be found in this dedicated section.  READ MORE


International sanctions

Recent guidance & corresponding material in respect of international sanctions against various countries has been updated with respect to temporary easing of sanctions against Iran.  READ MORE


Piracy

Essential precautions and preparation against piracy, as well as additional information and resources, loss prevention advisories and useful external web links


Emergency Contacts


If you need to call our offices out of hours and at weekends, click After Office hours for a up to date list of the names of the Duty Executives and their mobile phone numbers. 

Ship Finder


This Ship Finder is updated on a daily basis. Members who need to advise the Club of updates to their recorded ships' details should advise their usual underwriting contact.