INTERTANKO/OCIMF Safety Bulletin :アンカーウィンドラスに関する安全上のアドバイス

INTERTANKO/OCIMF Safety Bulletin :アンカーウィンドラスに関する安全上のアドバイス


OCIMF and INTERTANKO have been made aware that some anchor windlass machinery in service may still be subject to catastrophic failures similar to that experienced in an incident investigated eight years ago by the UK Marine Accident Investigation Branch (MAIB). The MAIB’s “Report on the investigation of the catastrophic failure of a windlass hydraulic motor on board Stellar Voyager” can be found here. One person was injured in that incident. The report concluded that the most likely cause of the catastrophic failure was over-pressurisation of the system due to the reversal of the hydraulic motor as the chain rendered.
Following the incident, recommendations were made to several stakeholders. Despite these recommendations, and although rare, it has recently come to the attention of OCIMF and INTERTANKO that similar incidents have since occurred. The most recent incident in March 2017 resulted in a serious injury.
Members can help to reduce the number of incidents by doing the following:

  • Understand the design/operating limitations of windlasses fitted. Limiting factors to consider may include current, wind, water depth, and the length/weight of the chain and anchor.
  • Be familiar with all manufacturer equipment and operation manuals.
  • Be guided by recommendations in the OCIMF publication Anchoring Systems and Procedures, especially section Protection Against Catastrophic Failure.
  • Contact the manufacturer(s) of windlasses fitted for further clarification and understanding of design and operating limitations.
  • Based on discussions with the windlass manufacturer the ship operator may wish to consider installing protective containment around the hydraulic motor.
  • Take note of IACS UR A3 Anchor Windlass Design and Testing, section 3.4 that will be uniformly implemented by IACS from 1 July 2018

Although the MAIB report on the Stellar Voyager incident largely focused on a bent axis axial piston variable displacement pump, it is unclear to OCIMF and INTERTANKO how many windlasses remain in service and at risk of a similar failure. If Members are unsure, we urge them to contact their windlass manufacturer(s) and seek guidance on this important safety issue.

Emergency Contacts

If you need to call our offices out of hours and at weekends, click After Office hours for a up to date list of the names of the Duty Executives and their mobile phone numbers. 

Ship Finder

This Ship Finder is updated on a daily basis. Members who need to advise the Club of updates to their recorded ships' details should advise their usual underwriting contact.

You are currently offline. Some pages or content may fail to load.