UK P&I Club Webinars: Fuel Quality - Practical and Legal Issues (Parts 1 & 2)
The UK P&I Club successfully conducted two webinars on the 2nd of April and 6th May from its Singapore office. In view of the social distancing measures put into place by the industry, this was one of the ways the UK P&I Club has adapted to service its Members and ensure the safety of its Membership and entered tonnage. The webinars addressed the following topics:
- Bunker Quality Claims
- Technical Aspects of a Fuel Quality Claim
Webinar 1: Bunker Quality Claims
The 1st Webinar was held on the subject of “Bunker Quality Claims”. It was moderated by Capt Anuj Velankar, Sr Loss Prevention Advisor with the UK P&I Club, who stressed on the need for the industry to keep an eye on the usual suspects of maritime hazards while the industry focused its attention on the challenges related to Covid-19. The situation with bunker quality claims as he explained was particularly a tough one as this involved various parties from shipboard staff to owners, charterers and bunker suppliers who needed to work together and clearly understand their rights and recourses against each other.
On the panel discussing the practical aspects was Ansuman Ghosh, Risk Assessor at the UK P&I Club, who is based at Singapore. Ansuman Ghosh built up on his extensive experience at sea and in the classification society to lay the case that although there were a large number of M/E failures, it was not always related to poor maintenance of machinery, but often related to either bad quality bunkers or even problems with management of fuel on the vessel. Ansuman covered various aspects of testing, including parameters as well as the various tests and the issues arising. Compliance issues with port state control was also discussed. Ansuman made the case that the fuel quality issues were notoriously difficult to deal with due the various type and parameters of fuels and testing around. As this was going to be part of the industry for the foreseeable future, it was important to align with reliable suppliers of bunkers.
Also on the panel was Kendall Tan, Partner with Singapore Law Firm Rajah & Tann. Kendall stressed on the need for shipowners to ensure that the terms in their charterparty clearly laid out the bunker standards and also the testing mechanisms to avoid disputes. For the charterers, it was necessary to distinguish their contractual chain between the bunker traders and the bunker suppliers. There were also possible rights of recourses under tort which should be explored by ship owners and charterers. Kendall also clarified on the very important aspect of burden of proof and the need for shipowners to maintain proper documentation onboard the vessel to protect their interests.
The recorded webinar can be found at the bottom of this page.
Webinar 2: Technical Aspects of a Fuel Quality Claim
The 2nd webinar held on 6th May was primarily a Q/A forum on “Technical aspects of a fuel quality claim”, following up from the 1st webinar. Anuj and Ansuman were joined this time by James Duncombe from CWA to answer the various queries raised by the audience. James is a Chemist with CWA’s Oil and Chemicals department.
We found by the questions raised during the 1st webinar itself and subsequently in the feedback that there were still a lot of doubts and unanswered queries on the topic that needed to be cleared up. Most of these doubts seemed to be related to the practical and operational aspects of handling fuel.
We had also initiated important discussions and questions on fuel purchase standards in our last webinar. Why are people still using the older fuel standards? Is this just inertia to change or there is more to it?
There were also other queries related to various testing practices. Investigative tests such as GCMS testing pros and cons, repeatability and reproducibility issues. Adding to that, recently we are also seeing a number of cases related to piston ring and liner failures. How are these related?
James did a short presentation to explain these issues.
Ansuman raised concerns about the recent Main Engine liner damages and also hoped that the latest edition of ISO fuel standards are released soon to address the various concerns of the new VLSFO blends.
The seminars were very well attended with over 1000 people registering and around 640 people attending. There were multiple questions posed over the talks and an active Q&A session conducted over the later parts of the webinars. Some encouraging feedback was also received by the Club including suggestions for future topics which the Club is taking into account as it looks to build on the success of the first two episodes with future installments.
The recording of this webinar can be found at the bottom of this page.
You may also be interested in:
The UK P&I Club successfully conducted its first webinar, it focused on the practical and legal issues of fuel quality.
UK P&I Club Live Webinar (Series 2): Fuel Quality Part 2 Technical Aspects of Fuel Quality Claims
Following the the success of the Club's 1st webinar, Anuj and Ansuman were joined by James Duncombe from CWA to answer various queries raised by the audience on the technical aspects of fuel quality claims.
We gladly invite you to join us for our second live webinar in our newly launched webinar series. In this webinar we will explore the technical aspects of fuel quality claims, leaving plenty of time for questions at the end.
In the second episode of the UK Club ask an expert series focusing on ballast water the topic of Type Approval US Vs IMO, old G8 Vs BWM Code – Limitations of the Type Approval is examined with Dr Li Gang from SGS.