Biofuels present problems for marine transport, handling and storage - 3 August 2010
Biofuels present problems for marine transport, handling and storage
3 August 2010
The production and use of biofuels for transport has increased dramatically in recent years and is set to continue, reducing carbon dioxide emissions and meeting growing consumer demand. As most biofuels will be transported by sea, the industry needs to take stock of its growing experience of what can go wrong aboard ship and develop safe and efficient shipping, loading, handling and storage practices.
Demand for biodiesel is expected to grow at an estimated annual compound rate of 15 per cent, rising from 20 million metric tonnes in 2010 to 45 million tonnes in 2015. Global biodiesel and ethanol sales could reach US$ 247 billion by 2020, up from US$ 76 billion predicted for 2010. In the first half of 2008/2009, about 670 million litres of biofuels were supplied to the UK transport market, with 92 per cent (about 616 million litres) imported.
The UK Government is stepping up its targets for forecourt sales of fuels from renewable sources to five per cent by 2013/14. The EU Renewable Energy directive would like it to be more as new sustainable biofuels come to market. By 2030, Lloyd's Register predicts global demand for 100 million tonnes of biofuel, requiring an extra 400 handysize tankers to transport it.
The situation is reviewed inBiofuels: marine transport, handling and storage issues,
prepared by The Carefully To Carry Committee and published by the UK P&I Club.
Blends of biofuels and conventional fuels are essentially mixtures of mineral oil based hydrocarbons and noxious liquid substances. The two main classes of 'first generation' biofuels in widespread use are biodiesel and bioethanol.
Biodiesel is derived from vegetable oils, such as palm, coconut, rapeseed, soybean and tallow, and from animal fats. Better known as Fatty Acid Methyl Esters (FAMEs), these are produced by reacting vegetable oil or animal fat with an alcohol, usually methanol. The transesterification process brings the properties of the raw materials closer to those of conventional petroleum diesel. FAME can be used neat as a fuel but is more commonly blended with petroleum diesel for use in diesel engines.
The different chemical compositions of FAME raw materials and their blend levels mean the end products vary in terms of stability, degradability and cold temperature performance. This will affect storage, handling, treatment, engine operations and emissions.
Bioethanol refers to ethanol produced by fermenting renewable sources of sugar or starch crops, such as sugar cane, sugar beet, sorghum, corn, wheat and cassava.
Unlike FAME, bioethanol is a single chemical compound, which is volatile, colourless miscible with
water and hygroscopic. Again, bioethanol can be used neat but is generally blended with conventional gasoline.
P&I club executives are beginning to receive insurance claims stemming from biofuel problems, most of which emanate from FAMEs. There is no standardised analytical technique for detecting FAME materials in fuel oils and data on their effect on marine fuel systems is limited.
Water contamination is the main problem as FAMEs absorb water via sea water ingress, tank washing residues, atmospheric humidity in tanks' ullage spaces and other sources.
FAME can hold high levels of water in suspension, rendering cargo off-specification. Water can promote hydrolytic reactions, breaking down the FAME to form free fatty acids. Such species are corrosive and may attack exposed metal surfaces. Water can separate out from FAMEs, promoting unwanted microbiological growth, which may lead to filter blocking and corrosion.
Potential shipping problems include degradation reactions by trace metals, such as copper heating coils or zinc-containing tank coatings. Thermal stability will be affected if FAME cargoes are stored next to heated tanks. Dry nitrogen blankets can help to prevent degradation reactions through air contact.
FAME can adsorb onto the walls of tanks or pipelines and de-adsorb into subsequently carried products, causing problems for multi-product pipelines or storage tanks, necessitating great care with tank cleaning and flushing and draining common lines. Switching from B5 diesel to jet fuel requires at least a hot water tank wash. Some would advocate at least three intermediate FAME free cargoes plus the hot water wash before loading jet fuel.
Tankers carrying multiple products risk inadvertently contaminating jet fuel cargoes with traces of FAME. The EN590 specification for ultra-low sulphur diesel (ULSD) allows up to seven per cent FAME content by value. Ship's tanks and lines should be completely stripped of all ULSD before loading jet fuel.
FAME acts as a solvent, taking up any organic residue, dirt or scale that may have accumulated on surfaces of tanks or pipelines. It attacks and quickens the ageing process of certain materials, including elastomers.
Unwanted water is also a major problem with bioethanol. The ethanol itself is hygroscopic and highly soluble in water. Small quantities of water can be dissolved in gasoline/bioethanol blends but, if there is too much, the ethanol will separate from the gasoline, forming an alcohol-rich water/ethanol aqueous phase and an alcohol- poor gasoline phase.
The former will collect at the bottom of the ship's tank or storage tank and is likely to be highly corrosive and not usable as fuel. The gasoline phase may be considered a "minor hazard to either marine resources or human health" if discharged into the sea from tank cleaning or deballasting operations.
Bioethanol also acts as a solvent, cleaning out dirty storage tanks and lines but becomes contaminated itself in the process.
UK Club Loss Prevention Director Karl Lumbers explained: "As volumes increase and new fuel sources, such as jatropha and algal oil enter the market, we can expect new sources of claims. The production and distribution of biofuels, particularly on board ship, will continue to provide a very real challenge. A knowledge of these products' properties will be very beneficial in minimising the risk of unwanted claims."The Carefully to Carry Committee – the UK P&I Club’s advisory committee on cargo matters---was established in 1961 to help reduce claims through expert and timely advice. Carefully to Carry is regarded as a key source of guidance for shipowners and ships’ officers and have been used in the settlement of claims and court hearings. All articles are available in print and on disk via the UK P&I Club website.
For further information:
Nick Whitear/Karl Lumbers
Thomas Miller P&I Ltd
Tel: +44 (0) 20 7283 4646
Dunelm Public Relations
Tel: +44 (0) 20 7345 5232
Fax: +44 (0) 20 7345 5234
You may also be interested in:
Since it launched in 2010, the International Group’s P&I Qualification (P&IQ) programme has grown to become one of the shipping industry’s foremost professional courses. In 2020, with its international reach and network, the IG P&IQ found itself perfectly positioned to deliver its courses and exams online. This led to the greatest participation levels to date, with 657 candidates sitting P&IQ examinations in the year.
Lessons Learnt: Flooding of cargo hold
During cargo operations, the duty deck officer noticed the presence of a large quantity of water within one of the holds. He immediately informed the master and arrangements were made to transfer the water into a holding tank using the hold bilge pumping system.
The UK P&I Club has released the latest video in its online ‘Ask an Expert’ series, featuring speakers from Veritas Petroleum Services (VPS) discussing the increasing prevalence of fuel combustion since the introduction of low sulphur fuel requirements.