Lessons Learnt: Serious leg injury during un-mooring operations
Whilst the vessel was alongside, the wind increased to BF 8 resulting in the suspension of cargo discharge operations. The vessel's master was then directed by the harbour master to vacate the berth and anchor off the port until weather conditions abated. By the time the pilot was on board for un-berthing, the vessel was ranging forward and aft alongside the berth under the influence of the strong wind and a swell entering the port, causing the mooring ropes alternately to slacken and then come under high tension loading. With tugs made fast, the crew commenced singling up the mooring ropes under the direction of the master and pilot. During this operation, an AB working aft stood astride a slackened spring rope which suddenly came under tension, striking his leg with considerable force. After being landed ashore, the AB was hospitalised with a broken thigh bone (femur) requiring a period of rehabilitation of almost one year.Analysis
Despite modern advances in technology, ships continue to rely on fibre and wire mooring ropes to remain safely alongside a berth and for towing operations as they have done for millennia. The combination of increased ship size and decreasing manning levels means that mooring operations can be one of the most challenging and potentially dangerous tasks required of seafarers today. Under normal, controlled circumstances, a well trained and experienced crew can expect to perform these operations efficiently and safely. However, in conditions of high wind and swell, difficulties in controlling the movement of a vessel alongside can result in mooring ropes coming under excessive strain very suddenly. Such shock loading may damage or part ropes and can expose crew on mooring decks to serious danger due to a whip lash effect or limbs becoming trapped between tensioned ropes, between ropes and adjacent structures or in bights.Lessons Learnt
- Crew must be fully familiarised with the vessel mooring arrangements and to be aware of the potential dangers associated with ropes and wires coming under excessive strain
- In advance of forecast bad weather or where berths are exposed to swell, the master should consider actions to avoid a dangerous situation developing, including vacating a berth in good time if necessary
- Crew should be trained to stand well clear of ropes which may come under heavy loading and to observe the golden rule of never standing in the bight of a rope during operations
Captain David Nichol
Senior Loss Prevention Executive (Greece)
You may also be interested in:
UK P&I CLUB LIVE WEBINAR (Series 5): Practical aspects of Passage Planning and Bridge Resource Management_Part 2
During registration, a lot of viewers raised the issue of Bridge teams interacting with Pilots and the best practices associated.
David Nichol, Senior Loss Prevention Executive at UK P&I Club, discusses a crew injury occurring when securing a tow and advises on the lessons that can be learnt from this incident.
The subject vessel was berthed on a NNE heading, port side to an exposed quay for cargo discharge operations. In the early morning, the wind was observed to increase in strength from the NW. The Master ordered the crew to deploy additional mooring ropes, with the final arrangement reported to be 4 head/stern lines, 2 breast lines and 2 spring lines forward and aft.